If you shoot military surplus .308 (7.62NATO) ammo, STAY AWAY FROM INDIAN SURPLUS. Excerpt:
Currently there is .308 surplus ammunition on the market made in INDIA with the headstamp OFV M80 and then a date code (usually 97), and a headstamp of KF 762b and then a date code (usually 91). From my understanding this ammunition came from the factory installed in machine gun belts. The ammunition was designed to be shot in a belt fed machine gun. A rumor is that they removed the belts/links from the ammuntion, and during the process, many of the necks got crushed, tweaked, the bullets loosened, and the bullets pressed further into the case.I'd say so.
Having an inquisitive nature, i figured, i would try this stuff out to see if it was as bad as everyone on the internet was saying.
--
Now, my initial test lot was 100 random rounds obtained by grabbing through the can after the obviously bad rounds were removed, and thrown away. I came up with 100 rounds that after a second look, showed zero signs of bad cases, crooked bullets, or anything
--
(O)ut of the 100 test sample rounds, i found a mixture of ball and stick powder (ball is round balls of powder, and stick looks like little sticks - two different things all together). out of 100 of the test samples, 93 had disk or ball type powder and 7 of them had stick type powder. for those not into reloading, that means they dumped whatever they had available into the cases to get them done. usually a lot of ammo is consistent in powder type. not so with the indian i had.
(A)fter weighing each powder charge inside each individual case, and charting it on paper, there was a powder variance of 6 grains between the lowest charge, and the highest charge. 6 grains of powder is an unsafe variance.
The post has pictures of a blown-up CETME, a blown-up MG42 (!), and a blown-up 1919(!!).
Ladies and gentlemen, boys and girls; CHEAPER AIN'T ALWAYS BETTER.
Apparently this is common knowledge around the "black rifle" crowd, but it's the first I've heard about it, and I thought it important enough to pass along.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.